Run Up / Coast Down Module
Displaying Acquired Data
Save – If desired, press the Save function button to save the RUCD measurement.
Reference Chapter 4, The Analyzer Module section on Saving Analyzer
Measurement Results for details on how to save your measurement.
Nyquist Plot Display
For analysis purposes, setup options for how to best process and display the recorded
data for each display format are specified by the user prior to data display.
Nyquist Plot Setup
• From the RUCD – Display Select menu, use arrow keys to highlight the Nyquist
icon, and press an Enter button. The RUCD – Nyquist Setup screen displays.
Figure 7 - 8.
The Nyquist Setup Screen.
Settings for a Nyquist plot are identical to those for a Bode plot, with the exception that
the displays of overall severity and a logarithmic Y-axis are not applicable; these settings
are absent from the setup screen. Refer to the previous Bode Plot Display section for
details on the remaining Nyquist plot settings.
SKF Microlog - GX Series 7 - 11
User Manual
To Next Page
Loading...
