SKF Microlog GX Series User Manual

Non ROUTE
How to Collect “User” Defined Non ROUTE Data
• Press an Enter button to store the measurement’s data and return to the Non
ROUTE mode’s main screen.
• When finished collecting the orbit measurement data, press an Enter button to
store your data and return to the Non ROUTE mode’s main screen.
How to Collect “User” Defined Non ROUTE Data
Overview
If one or more of the pre-set measurements does not meet your field analysis needs,
you may easily set up a new measurement with user specified measurement
parameters.
 The User mode’s measurement configuration remains active until
modified.
To set-up a User defined Non ROUTE measurement:
• From the main screen, use the arrow buttons to highlight the Non ROUTE option
and press an Enter button. You are placed in Non ROUTE mode.
• Press the User function button. The User screen displays.
Figure A - 6.
The NonROUTE User Defined Measurement Setup Screen.
Function Buttons
Help – Press the Help function button to quickly view the on-line help.
Default – Press to reset all User screen settings to their default values.
A - 10 SKF Microlog - GX Series
User Manual

SKF Microlog GX Series Specifications

General

Brand	SKF
Model	Microlog GX Series
Category	Measuring Instruments
Language	English