SKF Microlog GX Series - Example Conformance Test Results

Conformance Check Module
How to Perform a Conformance Survey
• Safely secure the sensor to the machine at the proper location / orientation and
press an Enter key to begin testing. The screen momentarily displays a message
indicating a measurement in progress, then displays test results for the current
measurement position, and automatically sequences to the next position.
Figure 9 - 21.
Example Conformance Test Results.
• Move the sensor to the next measurement position and press Enter again. Repeat
for all the machine’s test positions.
 Use up/down arrow buttons to locate a specific test position.
 Press the Skip function button to skip a test location / orientation
if location is not accessible.
SKF Microlog - GX Series 9 - 19
User Manual