SKF Microlog GX Series - Display; Display Setup; The Table Setup Screen

Run Up / Coast Down Module
Displaying Acquired Data
Table Display
For analysis purposes, setup options for how to best extract and display the recorded
data for each display format are specified by the user prior to data display.
Table Display Setup
• From the RUCD – Display Select menu, use arrow keys to highlight the Table icon,
and press an Enter button. The RUCD – Table Setup screen displays.
Figure 7 - 10.
The Table Setup Screen.
Settings for a table display are identical to those for a Bode plot, with the exception that
the displays of overall severity and a logarithmic Y-axis are not applicable; these settings
are absent from the setup screen. Refer to the previous Bode Plot Display section for
details on the remaining Table display settings.
 The number of orders that can be tabulated is limited to two
orders.
SKF Microlog - GX Series 7 - 13
User Manual