SKF Microlog GX Series - An Example Table Display

Run Up / Coast Down Module
Displaying Acquired Data
Table Display
• After setting Table Setup options, press the Display function button to display the
table.
 The larger the acquired data .wav file, the longer the processing
time required.
Figure 7 - 11.
An Example Table Display.
On the displayed table:
• Up and down arrow buttons sequence through extracted data sets. Magnitude and
phase angle data are displayed for up to two orders of each extracted data set.
 Tip – With a table displayed, use the “shift function” button (0 / up
arrow) to display Nyquist and Bode function buttons that allow
instant display of Nyquist and Bode plots using the same settings.
 Table data is saved in .csv format, which can be opened in
Microsoft Excel or imported into other applications that support
comma separated value files.
7 - 14 SKF Microlog - GX Series
User Manual