SKF Microlog GX Series - EM Distance Test Overview; To Perform an EM Distance Test; EM Test Setup Screens; EM Test for HSK and ISO

Spindle Test Module
Spindle Tests Overview
EM distance test overview
To perform an EM distance test:
• Power the Microlog on and select the Spindle module’s EM test.
• In test setup screens, enter tool holder type and select the appropriate
conformance setup.
Figure 10 – 22.
EM Test Setup Screens.
HSK
ISO
HSK
ISO
Figure 10 – 23.
EM Test for HSK and ISO.
10 - 16 SKF Microlog - GX Series
User Manual