SKF Microlog GX Series - Fitting the Wind Baffle; Parabolic Reflector with Wind Baffle; The Microphone;Parabolic Reflector Connected to the Microlog

Idler Sound Monitor Module
Hardware Setup
Figure 11 - 8.
The Microphone/Parabolic Reflector Connected to the Microlog.
Fitting the Wind Baffle
Figure 11 - 9.
Parabolic Reflector with Wind Baffle.
On windy days, it may become necessary to fit the microphone / parabolic reflector’s
wind baffle (CMAC 5143) over the parabolic reflector to reduce wind noise. Simply
stretch the wind baffle’s elastic band over the parabolic reflector until snug.
SKF Microlog - GX Series 11 - 9
User Manual