SKF Microlog GX Series - How to Change the Measurement Setup before Performing the Measurement

Data Recorder Module
How to Perform a Data Recorder Measurement
How to Change the Measurement Setup before Performing the
Measurement
 The New measurement icon allows you an alternative way to set
up a new Recorder measurement.
To change the measurement’s settings and then take the measurement:
• From the Recorder screen use the arrow keys to highlight the General icon, and
press the Setup function button (or the Enter / Fire key). The measurement’s
setup screen displays.
Figure 6 - 5.
The General Measurement’s Setup Screen (Expanded View).
The setup screen initially displays a “reduced” list of measurement parameters, those
that are more frequently changed by analysts prior to performing the measurement.
The complete parameter list may be viewed using the setup screen’s Expand function
button.
To alter the measurement’s setup and then perform the measurement:
• Use the up / down arrow keys to highlight the measurement parameter to change,
then use the right arrow to display the parameter’s options.
• Highlight or enter the desired option, then press the left arrow key (or Enter button)
to select the highlighted option.
6 - 6 SKF Microlog - GX Series
User Manual