SKF Microlog GX Series - The Main Menu Screen; The Setup Screen

Introduction to the SKF GX Series Microlog
How to Use the Buttons and Keypad
Figure 1 - 6.
The Main Menu Screen.
Setup Screens – In a setup screen, use the up/down arrow buttons to highlight the field
whose setting you wish to change. With the desired field highlighted, use the right/left
arrow buttons to open/close the field, displaying its available settings. Then use the
up/down arrow buttons to highlight the field’s new setting and press Enter.
 In setup screens, when not in an input field, the 0 / up arrow
(shift) button jumps the highlight to the screen’s first setting.
Figure 1 - 7.
The Setup Screen.
SKF Microlog - GX Series 1 - 15
User Manual