SKF Microlog GX Series - The Measurement Results Screen; A Machine Graphic Indicating Measurement Locations

Conformance Check Module
How to Perform a Conformance Survey
Figure 9 - 19.
The Measurement Results Screen.
• To determine measurement locations on the machinery being tested, press the
Graphic function button. A graphic displays the machine’s measurement locations.
Note that the Graphic button only appears if the template includes a picture.
Figure 9 - 20.
A Machine Graphic Indicating Measurement Locations.
• Press the Table function button to return to the Measurement Results screen.
9 - 18 SKF Microlog - GX Series
User Manual