SKF Microlog GX Series - Displaying Acquired Data

Run Up / Coast Down Module
Displaying Acquired Data
Speed – Displays the machine’s current speed.
 This is only applicable if a tachometer is used.
Overall – Displays the measurement’s current overall vibration reading.
Max – The maximum vibration amplitude and the speed at which it occurred.
Rec Time – In an Armed state, shows the Maximum Acquisition Time setting. In an
Acquiring state, counts down to show the remaining recording time.
When the specified Stop Speed or the specified Maximum Acquisition Time is reached,
or if the operator presses the Stop function button, the resulting time waveform is
recorded as a Microsoft Windows .wav audio file and the Acquisition Completed
summary screen displays acquisition information.
 If errors occur during data acquisition, they are noted on the
Acquisition Completed summary screen.
Press the OK function button to acknowledge completion. The Microlog automatically
displays the RUCD - Display Select menu to provide analysis options for the recorded
data.
Displaying Acquired Data
Figure 7 - 5.
The Display Select Menu.
SKF Microlog - GX Series 7 - 7
User Manual