SKF Microlog GX Series - To Select a ROUTE; A Hierarchy List Screen

Introduction to the SKF GX Series Microlog
How to Use the Buttons and Keypad
Hierarchy List Screens – On the Microlog, you can display one ROUTE hierarchy at a
time.
Figure 1 - 8.
A Hierarchy List Screen.
To select a ROUTE:
• From the main menu, highlight the ROUTE icon and press an Enter button. The
Route Mgr screen displays a list of all ROUTEs stored in the selected Microlog
memory.
• With the ROUTE list displayed, use the up/down arrows to highlight the name of the
ROUTE you wish to collect, then
• Use the Enter or right arrow button to select the highlighted ROUTE. A progress
dialog displays as the Microlog loads the ROUTE into memory.
Branching from the active Route hierarchy item are SET, Machine, and POINT
hierarchy items. Use the arrow key procedures described above to navigate these
additional hierarchy items and their sub-items.
 Machine and POINT hierarchy level items are mandatory for all
@ptitude Analyst databases, and typically contain multiple sub-
items.
Data Display Screens – In a spectral display screen, use the left/right arrow buttons to
move the spectrum’s cursor, and to control display expansion. Use the up/down arrow
buttons to adjust the spectrum’s full scale range.
1 - 16 SKF Microlog - GX Series
User Manual