SKF Microlog GX Series - Spectrogram Plot Display; Spectrogram Plot Setup; The Spectrogram Setup Screen; The Spectrogram Display Setup Menu

Run Up / Coast Down Module
Displaying Acquired Data
Spectrogram Plot Display
For analysis purposes, setup options for how to best process and display the recorded
data for each display format are specified by the user prior to data display.
Spectrogram Plot Setup
• From the RUCD – Display Select menu, use arrow keys to highlight the
Spectrogram icon, and press an Enter button. The RUCD – Spectgm Setup
screen displays.
Figure 7 - 23.
The Spectrogram Setup Screen.
Settings for a spectrogram plot are identical to those for a waterfall plot. Refer to the
previous Waterfall Plot Display section for details on spectrogram plot settings.
Spectrogram Plot Display
• After setting Spectgm Setup options, press the Display function button to process
spectral data and display the Spectgm Disp. Setup menu.
 The larger the acquired data .wav file, the longer the processing
time required.
Figure 7 - 24.
The Spectrogram Display Setup Menu.
SKF Microlog - GX Series 7 - 23
User Manual