SKF Microlog GX Series - Example of a ROUTE Hierarchy List (with Access to Nonroute Module)

The ROUTE Module
How to Collect ROUTE Measurements
Figure 3 - 2.
Example of a ROUTE Hierarchy List (with Access to Nonroute Module).
active ROUTE
SET
Machine
POINTs
initiate Nonroute mode
Review data for selected POINT
active POINT’s info area
On the Microlog, you can display one ROUTE’s measurement hierarchy at a time. The
“active” ROUTE is selected from the Route Mgr screen.
To select a ROUTE:
• From the main menu, highlight the ROUTE icon and press an Enter button. The
Route Mgr screen displays a list of all ROUTEs stored in the selected Microlog
memory.
• With the ROUTE list displayed, use the up/down arrows to highlight the name of the
ROUTE you wish to make active, then
• Use the right arrow button to select the highlighted ROUTE. A progress dialog
appears as the Microlog loads the ROUTE into memory, and the specified ROUTE’s
hierarchy displays in the ROUTE list.
• When the ROUTE first displays, the hierarchy is collapsed. Use the right arrow
button to expand each level of the ROUTE hierarchy, or
• Use the Expand function button to open all the SETs, Machines, and POINTs in the
ROUTE.
SKF Microlog - GX Series 3 - 5
User Manual