SKF Microlog GX Series - A Residual Unbalance Message

Machinery Balancing Module
How to Perform a Single-Plane Procedure
Enter the Act. Corr Weight, Act. Angle, and Act. Radius you will be using for the
correction run, and then press the dialog’s OK function button. The Microlog displays
the residual unbalance you will have when you use these settings.
 If desired, press the Calc button to return to the initial calculated
Correction Weight screen.
Figure 5 - 17.
A Residual Unbalance Message.
5 - 22 SKF Microlog - GX Series
User Manual