SKF Microlog GX Series - A Filtered 1 X (First Order) Orbit Display; The Orbit Default Setup Screen (Expanded View)

The Analyzer Module
How to Measure Shaft Orbit
Figure 4 - 21.
A Filtered 1X (First Order) Orbit Display.
To change the Orbit measurement’s settings and then take the measurement:
• From the Analyzer screen, use the arrow keys to highlight the Orbit icon, and press
the Setup function button (or the Enter / Fire key). The measurement’s setup
screen displays.
Figure 4 - 22.
The Orbit Default Setup Screen (Expanded View).
The setup screen initially displays a “reduced” list of measurement parameters, those
that are more frequently changed by analysts prior to performing the measurement.
SKF Microlog - GX Series 4 - 31
User Manual