SKF Microlog GX Series - Global Measurement Settings

How to Set Up Your GX Series Microlog
Global Measurement Settings
Global Measurement Settings
Overview
This section describes Instrument Configuration screen options, which determine
various global data collection settings. These settings apply to all Microlog
measurements.
To access the Instrument Configuration Screen:
• From the main screen, highlight the Route option using the left, right, up, and/or
down arrow buttons and press an Enter button. The Route Mgr screen lists a
ll
R
OUTEs stored in the Microlog.
• From the Route Mgr screen, press the Config function button. The Instrument
Configuration screen displays.
Figure 2 - 2.
The Instrument Configuration Screen.
Instrument Configuration Screen Settings
Function Buttons
Help – Press the Help function button to quickly view on-line help for Microlog data
collection.
BackSpace – Press the BkSp function button to delete entered numeric text in any text
field.
Apply – Press the Apply function button to save Instrument Configuration screen
settings and return to the previous screen.
The following global data collection settings are determined from the Instrument
Configuration screen:
SKF Microlog - GX Series 2 - 7
User Manual