Non ROUTE
Multi Channel Cursor, Display Expand, and Full Scale Adjustments
Figure A - 13.
A Cross Channel Phase Data Display Screen.
Phase Tables
Phase is displayed as a table of magnitude/phase pairs of up to 8 orders.
In a dual channel display, the top trace displays the first channel and the lower trace is
the second. Boost values and cursor moves are applied to both traces, whether
displayed or hidden.
Reference the Multi Channel Cursor, Display, Expand, and Full
Scale Adjustments section later in this chapter for more
information.
• Use the up/down arrow buttons to scroll through the phase table values.
When you are finished collecting and viewing the cross-channel phase measurement
data, press an Enter button to store your data and return to the Non ROUTE mode’s
main screen.
Multi Channel Cursor, Display Expand, and Full Scale Adjustments
For multi channel measurements, the cursor operates simultaneously on all traces
(even if one is hidden). This is also true for Full Scale adjustments using the up/down
arrow buttons (amplitude axis), and display / expand adjustments using the +/- keys
(frequency/time axis).
Independent Autoranging
For two channel measurements, autoranging is performed simultaneously on both
channels. This allows you to use two probes of differing sensitivity, and allows you to
A - 24 SKF Microlog - GX Series
User Manual
To Next Page
Loading...
