Machinery Balancing Module
How to Perform a Dynamic 2 Plane Procedure
Figure 5 - 22.
The 2-Plane Initial Run Screen with Data Displayed.
The measurement results continuously update on the screen. This allows you to
determine how stable the measurement conditions are, prior to recording the
measurement.
Polar – Press the Polar function button to display a polar vector version of the initial
run data instead of the bar chart version. This polar vector display provides a more
powerful analysis tool to visually gauge your balancing job’s progress. In a 2-plane
procedure, only one plane’s polar plot displays at a time. Use the right / left arrow keys
to display the other plane’s polar plot.
SKF Microlog - GX Series 5 - 29
User Manual
To Next Page
Loading...
