The Analyzer Module
How to Perform Multi-Channel Measurements
Triax Displays
Figure 4 - 19.
A Triax Spectral Display Screen.
If three input channels were selected, data is collected with a Triax Accelerometer
Sensor, which simultaneously collects three measurements for the sensor location (one
for each axis monitored by the Triax accelerometer sensor). Triax measurements show
three spectra, one for each axis.
View menu options are:
FFT, Power Cepstrum, and Power Spectrum for all three channels
simultaneously, each channel independently, or combinations of each plot type
on a specific channel, and the Table of peaks for Channels 1, 2, and 3.
• When finished collecting and viewing your multi-channel measurement data, press
an Enter button to store your data and return to the Analyzer main screen.
Multi Channel Cursor, Display Expand, and Full Scale Adjustments
For multi channel measurements, the cursor operates simultaneously on all traces
(even if one is hidden). This is also true for Full Scale adjustments using the up/down
arrow buttons (amplitude axis), and display / expand adjustments using the +/- keys
(frequency/time axis).
4 - 28 SKF Microlog - GX Series
User Manual
To Next Page
Loading...
