SKF Microlog GX Series - How to Set Up or Customize Conformance Test Templates

Conformance Check Module
How to Set Up or Customize Conformance Test Templates
Figure 9 - 3.
The Microlog GX’s Template Selection Screen.
How to Set Up or Customize Conformance Test Templates
If appropriate, use a host computer with the supplied Conformance Check Setup
Generator software (CC Setup software) to modify standardized test template settings
to better employ your machinery vibration conformance tests. In addition, you may use
the CC Setup software to set up custom templates specific to your machinery
conformance survey needs.
 To install the Conformance Check Setup Generator application,
simply run the installer file (for example, ‘ConfCheck
SetupGenerator v1.20RC6_SKF.msi’) and follow the on-screen
instructions.
To set up a custom test template:
• Start the CC Setup application from the Windows

Start menu.
9 - 4 SKF Microlog - GX Series
User Manual