SKF Microlog GX Series - A Note about Host Software Fmax Values; Selecting Operators; The Route Manager

The ROUTE Module
Selecting Operators
• Press an Enter button. The ROUTE will momentarily update and you are placed in
the Route Mgr. screen. The ROUTE list will display the downloaded ROUTEs.
 If more than one operator is downloaded from the @ptitude
Analyst host software, the Select Operator screen displays.
A Note about Host Software Fmax values
Fmax values entered are adjusted to the next highest valid Fmax value available in the
Microlog. The adjusted (actual) value appears on the collected spectrum’s x-axis.
Selecting Operators
The Microlog enables you to associate an operator and the data that he or she collected
on a specific date and instrument, if more than one Microlog is used.
After selecting the Route option from the main screen, the Select Operator screen
displays.
• Use the up/down arrow buttons to highlight the desired operator and press the OK
function button.
You are placed in the Route Mgr screen with a list of available ROUTEs displayed.
The Route Manager
The Route Mgr screen displays all ROUTEs that have been downloaded to the Microlog
from @ptitude Analyst. Use the up/down arrows to select a ROUTE in the list. Press an
Enter or right arrow button to open the highlighted ROUTE’s hierarchy.
Function buttons on the Route Mgr screen include:
Config – Press the Config button to open the Instrument Configuration screen, which
provides access to various global data collection settings. (See the Global
Measurement Settings section in Chapter 2 for details.)
Reset – Press the Reset button to delete all stored data records for the highlighted
ROUTE, as well as all Non-ROUTE data.
Delete – Press the Delete button to remove the highlighted ROUTE.
Back – Press the Back button to close the Route Mgr and return to the Main Menu
screen.
Help – Press the Help function button to quickly view on-line help for Microlog data
collection.
SKF Microlog - GX Series 3 - 3
User Manual