Data Recorder Module
How to Perform a Data Recorder Measurement
How to Perform a Data Recorder Measurement
To perform a data Recorder measurement:
• Attach the sensor(s) to the test object (machine case or structure).
• From the main menu screen, use arrow keys to highlight the Recorder icon, and
press an Enter / Fire button. The Recorder screen displays.
Figure 6 - 1.
The Recorder Screen.
Recorder menu options are:
Recall – Recalls the setup screen for the last Recorder measurement that was taken
(whether it was saved or not).
General – Initiates a Recorder measurement using default settings.
New - Provides another way to set up a new “user defined” Recorder measurement.
Review – Initiates the Recorder – Load Setup screen allowing you to review previously
saved Recorder measurement data or saved Recorder measurement setups.
Function Buttons
Function buttons at the bottom of the Recorder screen include:
Help – Displays the Microlog’s context sensitive help screen.
Setup – Displays the measurement setup screen for the highlighted measurement type
(i.e., Recall, General, or New).
Start – Take Recorder data using the currently highlighted icon’s settings.
Back – Returns you the Microlog’s Main Menu screen.
6 - 2 SKF Microlog - GX Series
User Manual
To Next Page
Loading...
