SKF Microlog GX Series - A Motor Current Test Display.; To Change the Motor Current Measurement’s Settings

The Analyzer Module
How to Perform Motor Current Measurements
Figure 4 - 26.
A Motor Current Test Display.
Average, Stop, Start, and Save function button options operate as previously described
in this chapter’s Using the Default Measurement Setup section. Reference this
previous section for details.
Motor Current View Options
View - Use the View function button to determine how to view the displayed motor
current test measurement results.
View options for motor current measurements include:
FFT for CH1
Power Cepstrum for CH1
Power Spectrum for CH1
FFT+Power Cepstrum for CH1
FFT+Power Spectrum for CH1
Table of peaks for CH1
To Change the Motor Current Measurement’s Settings
• From the Analyzer screen use the arrow keys to highlight the Motor Current icon,
and press the Setup function button (or the Enter / Fire key). The measurement’s
setup screen displays.
SKF Microlog - GX Series 4 - 37
User Manual