SKF Microlog GX Series - Verify Acquired Data; The Taking Data Screen - Final FRF

Frequency Response Function Module
Recording the Measurement
Figure 8 - 8.
Verify Acquired Data.
• Review the FRF data and either Accept or Reject the hit.
When all the averages are taken, the Taking Data screen updates to show the FRF
magnitude / phase traces. The text box at the bottom of the screen indicates how many
hits were taken.
Figure 8 - 9.
The Taking Data Screen – Final FRF.
The FRF - Taking Data screen shows frequency, magnitude, phase, and Q factor
(where appropriate) at the cursor position. The FRF measurement can be seen on the
SKF Microlog - GX Series 8 - 11
User Manual