SKF Microlog GX Series User Manual

The ROUTE Module
How to Review Collected Data
How to Review Process (Static) Measurement Data
The Microlog enables you to display a Review Process screen for stored process
measurement data.
To review a process measurement POINT’s data:
• In the ROUTE hierarchy, use the right, left, up, and down arrows to highlight the
desired process POINT and press the Review function button. The Review Process
screen displays.
 Review Process display screen functions are similar to process
measurement data collection screens, except the Manual and
Notes function buttons are unavailable, and the review screen
includes an option to Delete the stored measurement. Refer to
chapter’s How to Collect Process Measurements section for
more information.
• If you would like to delete the stored process measurement, press the Delete
function button. A confirmation message appears. Press Yes to remove the
measurement or No to retain it.
• After reviewing your stored measurement data, press the Review screen’s Back
function button to return to the ROUTE hierarchy screen.
3 - 34 SKF Microlog - GX Series
User Manual

SKF Microlog GX Series Specifications

General

Brand	SKF
Model	Microlog GX Series
Category	Measuring Instruments
Language	English