SKF Microlog GX Series - Example Showing All Measurement Results; Example Showing Measurement Values

Conformance Check Module
How to Perform a Conformance Survey
Figure 9 - 22.
Example Showing All Measurement Results.
If desired, use left/right arrow buttons to toggle between measurement grades and
measurement values.
Figure 9 - 23.
Example Showing Measurement Values.
Shift < Col / Col > Function buttons - Our example shows three measurements (bands)
graded for each test position. The Microlog GX can calculate up to 64 measurements
for each position. If more than three bands are tested, hold down the Shift key (zero /
9 - 20 SKF Microlog - GX Series
User Manual