Machinery Balancing Module
How to Perform a Dynamic 2 Plane Procedure
Add the Correction Weight
Figure 5 - 28.
The Correction Weight CW 1 Screen.
The Correction Weight screen displays the permanent Correction weights, Angles, and
Radii balance solutions for both planes at the top of the screen, and correction weight
options at the bottom.
• Stop the machine, remove the temporary trial weights (if appropriate), and securely
attach the permanent correction weights at the precise angles and radii specified.
The Split Weight, Add/Remove, Correction, and Combine All fields – and the Actual
function button all operate as described in the previous How to Perform a Single-
Plane Procedure section.
In all Correction Weight fields, use the up / down / right / left
arrow buttons to move between fields.
SKF Microlog - GX Series 5 - 35
User Manual
To Next Page
Loading...
