The ROUTE Module
How to Collect ROUTE Measurements
Branching from the active Route hierarchy item are SET, Machine, and Point hierarchy
level items.
SET hierarchy level items are optional. Machine and Point hierarchy level items are
mandatory for all @ptitude Analyst databases.
A “SET” can only hold other SETs and Machines. A “Machine” can
only hold measurement POINTs.
• Use the same arrow button procedures described above to navigate these
additional hierarchy items and their sub-items. In short:
Left/Right arrows - navigate up and down hierarchy levels.
Up/Down arrows - navigate sub-items in drop down lists branching from a
hierarchy level.
When on the last or first POINT in a Machine, use the down or up
arrow keys to progress to the next or previous machine,
respectively.
Function buttons
Function and Enter button operations for the Route screen include:
Enter – Initiates data collection for the highlighted POINT.
Expand / Collapse – Use depends on whether the highlighted hierarchy Machine / SET
is open or closed. Expand / Collapse all sets, machines, and POINTs branching from
the active Machine / SET hierarchy item.
Review – Available only when the hierarchy pointer is on a POINT with stored data.
Opens the Review Data screen where you can review past measurement data for the
selected POINT.
Analyzer – Available when the Nonroute setting (on the Setup screen) is “Use Analyzer
Module.” Accesses Analyzer module, where you can collect measurement data for
POINTs not previously downloaded to the Microlog from your @ptitude Analyst host
software. However, note that data stored in Analyzer mode, when accessed in this
manner, can be uploaded to @ptitude Analyst as Non ROUTE data.
Nonroute – Available when the Nonroute setting (on the Setup screen) is “Use Legacy
Nonroute.” Accesses Nonroute mode, where you can collect measurement data for
POINTs not previously downloaded to the Microlog from your @ptitude Analyst host
software. However, note that data stored in Nonroute mode, when accessed in this
manner, can be uploaded to @ptitude Analyst as Non ROUTE data.
Notes – Opens the Notes screen where you may view or add coded or type-in notes for
the current POINT.
Back – Press the Back button to exit the selected ROUTE and return to the Route Mgr
screen.
Shifted Function buttons include:
Help – Press the Help function button to quickly view on-line help for Microlog data
collection.
3 - 6 SKF Microlog - GX Series
User Manual
To Next Page
Loading...
