Non ROUTE
How to Set Up Multi-Channel Measurements
Triax Displays
Figure A - 10.
A Triax Spectral Display Screen.
If three input channels were selected, data is collected with a Triax Accelerometer
Sensor, which simultaneously collects three measurements for the sensor location (one
for each axis monitored by the Triax accelerometer sensor). Triax measurements show
three spectra, one for each axis.
View menu options are:
Triax: Default View
POINT Info
Triax: No Overall
Ch1 FFT: Default View
Ch1 FFT: No Overall
Ch2 FFT: Default View
Ch2 FFT: No Overall
Ch3 FFT: Default View
Ch3 FFT: No Overall
Triax Spectrum + Time measurements include options to view
the Default View (spectrum), FFT and Time, or Time Only for
each channel.
• When finished collecting and viewing your multi-channel measurement data, press
an Enter button to store your data and return to the Non ROUTE mode’s main
screen.
SKF Microlog - GX Series A - 21
User Manual
To Next Page
Loading...
