SKF Microlog GX Series - Page 336

arrow 1-14
enter 1-14
function 1-14
shift 1-14, 1-17
C
cepstrum 4-5
channel control 11-10
channels
number of 4-9
chapter overview 1-3
clipped signal 7-6
coded notes 3-22
col < / > col function button 9-20, 10-6
collapse hierarchy 3-6
collecting data 3-4
color display 1-9
column, scroll 9-20, 10-6
communication
connections 1-22
set up 3-2
communications 1-25
activesync 1-25
USB 1-25
windows mobile device center 1-25
config screen 2-7
fill spectrum 3-13
frequency units 2-8
historical data collect 2-10
route ICP 2-9
configuration screen 2-7
conformance check
overview 9-1, 10-1
performing test 9-16, 10-2
saving results 9-21, 10-23
setup tabs 9-6
conformance check setup software 9-1, 9-4,
10-1
connections 1-22
coupling 1-23
disconnecting 1-23
correction type, balancing 5-7
coupling A-12
CPM 4-8, 4-10
cross channel phase A-22
data collection A-22
display screen A-23
measurement setup A-22
phase tables A-24
cursor
multi channel 4-28, A-24
peak 3-14
two channel 3-18
cursor mode 3-13
D
data
transfer 3-2
data collection 3-25
cross channel phase A-22, A-23
MPA measurements 3-27
multi spectrum A-17
multi time waveform A-17
orbit A-8
process measurements 3-19
retaking measurements 3-25
route 3-4
skipping measurements 3-25
data display
expand 3-18, 4-28, A-24
full scale adjustments 3-18, 4-28, A-24
multi channel cursor 4-28, A-24
phase tables A-24
two channel cursor 3-18
date format 2-5
date setting 2-5
db ref units 4-11
db reference 4-11
default function button 5-5
delete
measurement results 4-15
measurement setup 4-15
delete saved meas. 4-18
deleting meas. 7-26, 10-26
detection
analyzer 4-11
conf. checker 9-14
dimmed icons
hiding 1-10, 1-11
directions, test 9-7
display format A-11
display screen
printing 1-18
display y axis 4-10
download 1-22
downloading 3-2
dynamic measurements 3-10
review 3-28
Index - 2 SKF Microlog - GX Series
User Manual