Introduction to the SKF GX Series Microlog
GX Series Microlog Specifications
• Multi-point automation: Up to 12 measurements can be listed for one button push
automated data collection at each measurement location
Data displays
• Single and dual channel spectrum, single and dual channel time, phase table,
process, orbit, cross channel phase
• Simultaneous spectrum, time waveform, peak hold averaging
• Up to 12 bands (fixed or order base) downloadable from host software
Power
• Battery: Li-ion smart battery pack
• Eight hours continuous operation minimum
Physical data
• Dedicated keys: Up, down, right, and left two enter keys for right and left hand
operation, four function buttons
• Hot keys: Peak find, harmonic, expand
• LCD screen: Color 1/4 VGA 320 x 240 pixels (54 x 72 mm) viewable
• Case: High impact ABS with IP 65 dust and splash rating
• Weight: 715 g (1.6 lb.)
• Size (height x width):
– Narrowest point: 186 x 93 mm (7.4 x 3.7 in.)
– Widest point: 186 x 134 mm (7.4 x 5.4 in.)
• Drop test: 2 m (6.6 ft.), to MIL STD 810 specifications
Environmental
• Hazardous locations:
– CSA, Class I, Division 2, Groups A, B, C, D (special conditions per installation
drawing 090-22600, reference Appendix D, Safety Instructions)
– ATEX:
II 3 G Ex ic IIC T4 Gc (Ta = -10 °C to +50 °C) (special conditions per
installation drawing 090-22861-1, reference Appendix D, Safety Instructions)
– IECEx: Ex ic IIC T4 Gc (Ta = -10 °C to +50 °C)
• CE rated
– Special conditions per certifications
• IP Rating: IP 65
• Temperature ratings:
– Operating temperature: –10 to +50 °C (14 to 122 °F)
– Storage temperature: –20 to +60 °C (–4 to +140 °F)
• Humidity: 95% non-condensing
SKF Microlog - GX Series 1 - 31
User Manual
To Next Page
Loading...
