Stober SD6 - Function; X100

ID 442426.04 108WE KEEP THINGS MOVING
Connection
7
Manual SD6
7.4.1 X100
X100 specification
Terminal description X100
General specification
Maximum cable
length
30 m, shielded
Electrical data
Analog inputs 
AE1 and AE2
Level ±10 V
Resolution 16 bits
Internal resistance > 40 kΩ
Refresh rate Cycle time of the
application
Analog input 
AE1 as current input
(AE1+ and AE1 shunt
bridged)
Level ±20 mA
Resolution IO6: 12 bits
XI6, RI6: 16 bits
Internal resistance 492 Ω
Wire break monitoring Parametrizable in F15
Analog outputs 
AA1 and AA2
Level ±10 V
Maximum output current XI6: 10 mA
IO6, RI6: ± 20 mA
Pin Designation Function
1 AE1+ + Input of the analog input AE1
2 AE1-Shunt Current input; shunt connection Pin 2 must
be jumpered with pin 1.
3 AE1- Inverted input of analog input AE1
4 AE2+ + Input of analog input AE2
5 AE2- Inverted input of analog input AE2
6 AA1 Analog output 1
7 AA2 Analog output 2
8 AGND Reference ground
Maximum conductor cross-section
Connection type Maximum conductor cross-section [mm
2
]
Rigid 1.5
Flexible 1.5
Flexible with cable end,
without plastic sleeve
1.5
Flexible with cable end, with
plastic sleeve
0.5
2 leads with the same cross-
section with double cable end
—
1
2
3
4
5
6
7
8