Stober SD6 - Function

ID 442426.04 433WE KEEP THINGS MOVING
Diagnosis
16
Manual SD6
16.59 *ConfigStartERROR unknown limit
16.60 *ConfigStartERROR unknown post-wr
Triggering Level Response
The versions of configuration and firmware do not
match.
— The configuration does not start.
The power stage remains switched off, the drive is free of torque/force. A
possibly existing brake will be controlled to close. The brake chopper is
turned off.
Possible cause Test Measure Confirmable
The configuration saved in the
Paramodule originates from a newer
firmware that recognizes more limit
value functions.
— Apply a suitable configuration or firmware
via DriveControlSuite.
No
Triggering Level Response
The versions of configuration and firmware do not
match.
— The configuration does not start.
The power stage remains switched off, the drive is free of torque/force. A
possibly existing brake will be controlled to close. The brake chopper is
turned off.
Possible cause Test Measure Confirmable
The configuration saved in the
Paramodule originates from a newer
firmware that recognises more
PostWrite functions.
— Apply a suitable configuration or firmware
via DriveControlSuite.
No