Stober SD6 - X300; Function

ID 442426.04 125WE KEEP THINGS MOVING
Connection
7
Manual SD6
7.6.3 X300
Terminal description X300 for TTL encoders
General specification
U
2
a)
a) The drive controller forwards the output voltage to the encoder.
5 V
I
2max
250 mA
I
2min
13 mA
Maximum cable
length
100 m
Specification for incremental signals
f
max
≤ 1 MHz
Signal level TTL
Pin
a)
a) 1:1 connection to SD6: pin assignment corresponds to terminal X4.
Designation Function, data
Connector
1— —
2 GND Reference for encoder supply to pin 4
3— —
4U
2
b)
b) LA6 passes on the encoder supply as well as the sense line to the drive controller.
Encoder supply
5 B+ Differential input for B channel
6— —
7 N+ Differential input for N channel
8 A+ Differential input for A channel
9— —
10 — —
11 — —
12 Sense Sensor line for the supply voltage to adjust
the encoder supply
13 B- Inverse, differential input for 
B channel
14 N- Inverse, differential input for 
N channel
15 A- Inverse, differential input for 
A channel
15
9

8
1