ID 442426.04 12WE KEEP THINGS MOVING
Safety information, UL-compliant use
2
Manual SD6
2.5 Working on the machine
Apply the 5 safety rules in the order stated before performing any work on the
machine:
1. Disconnect.
Also ensure that the auxiliary circuits are disconnected.
2. Protect against being turned on again.
3. Check that voltage is not present.
4. Ground and short circuit.
5. Cover or block off adjacent live parts.
2.6 Disposal
Please comply with the latest national and regional regulations! Dispose of the
individual parts separately depending on their nature and currently valid
regulations such as, for example:
• Electronic scrap (PCBs)
• Plastic
• Sheet metal
• Copper
•Aluminum
2.7 Presentation of notes on safety
NOTICE
Notice
means that property damage may occur
if the stated precautionary measures are not taken.
CAUTION!
Caution
with warning triangle means that minor injury may occur
if the stated precautionary measures are not taken.
WARNING!
Warning
means that there may be a serious danger of death
if the stated precautionary measures are not taken.
DANGER!
Danger
means that serious danger of death exists
if the stated precautionary measures are not taken.
Information
Note that the discharge time of the DC link capacitors is up to 5
minutes. You can only determine the absence of voltage after this
time period.
Information
refers to important information about the product or serves to
emphasize a section in the documentation to which the reader
should pay special attention.
To Next Page
Loading...
