ID 442426.04 58WE KEEP THINGS MOVING
Technical data
4
Manual SD6
4.11 Braking Resistors
In addition to the different drive controllers, STOBER offers braking resistors in
different sizes and performance classes described in the following.
When selecting, note the minimum permitted braking resistors of the individual
SD6 types (see 4.2.2, page 30).
4.11.1 FZMU, FZZMU
Properties
The internal connections are wired with heat-resistant, silicon-insulated
strands of wire on terminals. Also ensure a heat-resistant and stress-resistance
design for the connection!
Conductor cross-section
Braking resistor – drive controller assignment
Not possible: —
Recommended: X
Possible: (X)
Type FZMU 400x65 FZZMU 400x65
ID no. 49010 55445 53895 55447
Resistance [Ω] 100 22 47 22
Power [W] 600 1200
Therm. time const. τ
th
[s] 40 40
Pulse power for < 1 s [kW] 18 36
U
max
[V] 848 848
Weight [kg] approx. 2.2 approx. 4.2
Protection class IP20 IP20
Test marks
Connection type Conductor cross-section [mm
2
]
Rigid 0.5 – 4.0
Flexible with cable end sleeve 0.5 – 2.5
Type FZMU 400x65 FZZMU 400x65
ID no. 49010 55445 53895 55447
SD6A02 X — — —
SD6A04 X — — —
SD6A06 X — — —
SD6A14 (X) — X —
SD6A16 (X) — X —
SD6A24 — X (X) X
SD6A26 — X (X) X
SD6A34 — (X) — (X)
SD6A36 — (X) — (X)
SD6A38 — (X) — (X)
To Next Page
Loading...
