EasyManua.ls Logo

Stober SD6 - Transportation, Storage and Operating; Environment

Stober SD6
439 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ID 442426.04 34WE KEEP THINGS MOVING
Technical data
4
Manual SD6
4.4 Transportation, storage and operating
environment
NOTICE
Material damage!
The DC link capacitors in devices of sizes 0, 1 and 2 can lose their electrical
strength through long storage times. Considerable material damage can arise
from a reduced electrical strength of the DC link capacitors when switching on.
Use devices in storage annually or before startup.
Surrounding operating
temperature
0 °C to 45 °C for nominal data
Storage/
transport temperature
-20 °C to +70 °C
Maximum change: 20 K/h
Relative humidity Maximum relative humidity 85 %, non-
condensing
Installation altitude Up to 1000 m above sea level without restrictions
Pollution degree Pollution degree level 2 as per EN 50178
Ventilated Installed fan
Vibration (operation) 5 Hz f 9 Hz: 0.35 mm
9 Hz f 200 Hz: 1 m/s
2
Vibration (transport) 5 Hz f 9 Hz: 3.5 mm
9 Hz f 200 Hz: 10 m/s
2
200 Hz f 500 Hz: 15 m/s
2

Table of Contents

Other manuals for Stober SD6

Related product manuals