Stober SD6 - Further Documentation; Further Support; Directives and Norms; Contents

ID 442426.04 5WE KEEP THINGS MOVING
General instructions
1
Manual SD6
1.2 Further documentation
The documentation listed in the following table provides relevant information on
the SD6 drive controller. 
You can find the latest document versions at www.stoeber.de.
1.3 Further support
If you have technical questions that are not answered by this document, please
contact:
• Phone: +49 7231 582-3060
• E-mail: applications@stoeber.de
1.4 Directives and norms
The SD6 drive controller meets the requirements of the following directives and
standards:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• EN 61326-3-1:2008
• EN 61800-3:2004
• EN 61800-5-1:2007
• EN 61800-5-2:2007
• EN 50178:1997
Device/software Documentation Contents ID
SD6 drive controllers Commissioning
instructions
Installation and
functional test
442537
Controller Based Mode
(CBM) application
Manual Operation and
setup,
commissioning
442454
Communication
module EtherCAT EC6
Operating manual Installation,
connection, setup,
commissioning and
customer service
442516
Communication
module CANopen CA6
Operating manual Installation,
connection, setup,
commissioning and
customer service
442637
MC6 Motion Controller Manual Projecting,
installation,
connection, setup,
customer service
and maintenance
442461
ST6 safety technology Manual Projecting,
connection, setup
442478
Absolute Encoder
Support AES
Operating manual Function,
connection
442343