Stober SD6 - Ae3

ID 442426.04 200WE KEEP THINGS MOVING
Drive controller
9
Manual SD6
9.8.3.3 AE3
Tau for reference value smoothing for analog input 3.
Values of the analog input.
• Element 0: Terminal value of the analog input before filtering.
• Element 1: Filtered value of the analog input before calibration.
• Element 2: Calibrated value of the analog input.
Zero value of the analog input.
Maximum positive value of the filtered analog input.
Maximum negative value of the filtered analog input.
Deadband value of the analog input.
Minimum percentage value of the calibrated analog input.
Maximum percentage value of the calibrated analog input.
F33 AE3 ref low pass filter version 0
E112 AE3 version 0
F130 Analog input 3 zero value version 0
F131 Analog input 3 maximum positive value version 0
F132 Analog input 3 maximum negative value version 0
F133 Analog input 3 deadband value version 0
F134 Analog input 3 minimum % value version 0
F135 Analog input 3 maximum % value version 0