Stober SD6 - Page 258

ID 442426.04 258WE KEEP THINGS MOVING
Encoder
12
Manual SD6
The following display parameter provides you with further information:
H900, H901 and H902 show internally supplied information about an EnDat®
encoder connected to X4.
For the exact meaning of the data, refer to the Encoder manufacturer's
documentation.
H900, H901 and H902 show internally supplied information about an EnDat®
encoder connected to X4.
For the exact meaning of the data, refer to the Encoder manufacturer's
documentation.
H900, H901 and H902 show internally supplied information about an EnDat®
encoder connected to X4.
For the exact meaning of the data, refer to the Encoder manufacturer's
documentation.
H900 EnDat information version 0
Parameter Element Description
H900 0..3 oper.cond.
4..47 Measuring device manufacturer's parameter
48..63 Operating parameter
64..127 Measuring device manufacturer's parameter for
EnDat® 2.2
H901 0..511 OEM parameter
H902 0..511 Measuring device manufacturer's correction values
H901 EnDat information version 0
Parameter Element Description
H900 0..3 oper.cond.
4..47 Measuring device manufacturer's parameter
48..63 Operating parameter
64..127 Measuring device manufacturer's parameter for
EnDat® 2.2
H901 0..511 OEM parameter
H902 0..511 Measuring device manufacturer's correction values
H902 EnDat information version 0
Parameter Element Description
H900 0..3 oper.cond.
4..47 Measuring device manufacturer's parameter
48..63 Operating parameter
64..127 Measuring device manufacturer's parameter for
EnDat® 2.2
H901 0..511 OEM parameter
H902 0..511 Measuring device manufacturer's correction values