ID 442426.04 267WE KEEP THINGS MOVING
Communication
14
Manual SD6
• The X3 A interfaces may only be connected with X3 B interfaces of other
drive controllers and vice versa.
• Suitable cables must be used. STOBER provides ready-made cables for
the layout of the Integrated Bus. These cables must be used to ensure
proper functionality. Also note section 4.9 Communication modules.
• The maximum overall extent of the IGB network is 100 m.
• The IGB does not require an explicit master and the extensive
configuration
typically required for Ethernet is eliminated.
To Next Page
Loading...
