Atlas Copco Power Focus 3000 User Manual

Digital I/O and fieldbus items
312 (428) 9836 3123 01
Name
Description
Fieldbus items
Duration
Tensor ST/SL
String
length
Value
Set signal
/ Reset signal
Time
To next tightening
Tracking
Blue LED
Sound (time duration for all)
Illuminator
TLS ST Tag LED
High angle
Angle result is higher than max angle limit.
X
X
X
X
X
High
current
Current status is high.
X
X
X
X
X
High PVT
monitoring
PVT monitoring is high
X
X
X
X
X
High PVT
selftap
PVT selftap is high
X
X
X
X
X
High
rundown
angle
Rundown angle is high
X
X
X
X
X
High
torque
Torque result is higher than max torque limit.
X
X
X
X
X
Home
position
Indicates that the
socket has reached
the position set by
digital input Set
home position, or
an Open end head
in open position.
1 bit
0 = Not used
1 = Home
position
Socket in home
position / Start new
tightening
X
X
X
Identifier
identified /
Identifier
recognized
An identifier with
Type 1, 2, 3, 4 has
been entered in
correct order and
has been accepted
by the system logic.
1 bit
0 = not used
1 = identified
Identifier identified
/ Start new
tightening
X
X
X
X
X
Identifier
multi
Shows an identifier,
Max length 100
bytes.
16 – 800
bits
CC
Max 100 char in
a string
Multi identifier
selected / No signal
16 – 800
CSCI
Max 100 char
Identifier
result part
A-D
Show identifier
result part, witch in
each tightening
result.
16 – 200
bits
CSC
Max 25 char
Tighten result /
Start new tightening
Identifier
type #
# = 1-4
Received
An identifier with
Type 1, 2, 3, 4 has
been entered in
correct order and
has been accepted
by the system logic.
1 bit
Received identifier
type / Bypass
identifier / Reset
latest Identifier /
Reset all identifier
X
X
X
X
X

Atlas Copco Power Focus 3000 Specifications

General

Brand	Atlas Copco
Model	Power Focus 3000
Category	Control Systems
Language	English