Atlas Copco Power Focus 3000 User Manual

Digital I/O and fieldbus items
320 (428) 9836 3123 01
Name
Description
Fieldbus items
Duration
Tensor ST/SL
String
length
Value
Set signal
/ Reset signal
Time
To next tightening
Tracking
Blue LED
Sound (time duration for all)
Illuminator
TLS ST Tag LED
Safe to
disconnect
tool
1 bit
Ack for
disconnect tool
request from
fieldbus.
Disconnect tool
allowed / Done
X
Sent
tightening
ID
Indicates which
tightening result is
sent to PLC.
2 bytes
U16
Integer value
Result is sent to
PLC / No signal
Selected
channel in
Job
Indicates selected
channel in a forced
order Cell Job.
1 bit
0 = Not used
1 = Selected
channel
Prompt selected
channel / Cancel
prompt channel
X
X
X
Selector
socket info
Indicates the socket
status on a selector
16 bits
OA
Byte 0=Device
ID
Byte 1=lifted
socket position
Socket lifted /
socket back to
position
Selector
info
Indicates selector
socket and LED
information.
32 bits
OA
Byte 0 = device
ID
Byte 1=lift sock
no.
Byte 2, 3
=selector LED
Select Led or
socket changed /
No signal
Service
indicator
alarm /
Service
indicator
Indicates that the
number of
tightenings in the
tool memory has
reached the service
interval limit.
1 bit
0 = Alarm Off
1 = Alarm On
Service indicator
alarm on / Reset
counter
X
X
X
X
Start
trigger
active
Used to let the tool trigger or the external tool start trigger control
Illuminator. This relay function is available for Illuminator only.
X
X
Stat alarm
Echo display stat
LED.
1 bit
0 = Off
1 = On
Stat alarm On / Stat
alarm Off
X
X
X
X
X
Sync
channel#
Green/Red/
Yellow
LED # = 1-
10
A result from a
Sync channel.
Follow tool light.
There are 30 (3x10)
different items in
the setup.
1 bit
0 = Not used
1 = green / red /
yellow
Sync tightening
result / Start new
tightening or new
Pset selected or
new Job selected

Atlas Copco Power Focus 3000 Specifications

General

Brand	Atlas Copco
Model	Power Focus 3000
Category	Control Systems
Language	English