SV-GPS-2020 GPS Antenna/Receiver Installation and Configuration
SkyView HDX System Installation Manual - Revision E 11-9
11.6 Additional Configuration Required for Compliance with FAA 2020 ADS-
B Out Mandate
The section (above) deals with installation and configuration of the SV-GPS-
2020 only. However, installing the SV-GPS-2020 is only part of what is
required to be compliant with the FAA 2020 ADS-B Out mandate. Specifically,
next steps include:
• Update your SkyView system to Software v14.0 (or later).
• Change the SV-XPNDR-261’s source of GPS data to the SV-GPS-
2020.
For the details on the transponder changes, and explanation of overall
compliance with the FAA 2020 ADS-B Out mandate, see the SV-XPNDR-261
Transponder Installation and Configuration section.
To Next Page
Loading...
