SV-XPNDR-261 Transponder Installation and Configuration
SkyView HDX System Installation Manual - Revision E 12-31
The SV-XNDR-261 can now be manually switched to ALT and GND modes: XPNDR >
ALT and XPNDR > GND.
After transponder testing is complete, remember to return the transponder to
its normal configuration: (typically) SETUP MENU > TRANSPONDER SETUP
> AUTO ALT/GND > AUTOMATIC (AIR DATA) or the squat switch
configuration as previously recorded.
Dynon Avionics SV- SV-GPS-2020 Compliance Statements
Use of Dynon Avionics SV-GPS-2020 as a GPS
Position Source for US ADS-B Out
A SkyView system equipped with an SV-GPS-2020 as a position source and an SV-
XPNDR-261 as the ADS-B transmitter meets the minimum performance requirements
in 14 CFR § 91.227 for operation in the airspaces as defined by 14 CFR § 91.225 when
installed and configured per the instructions in this document.
Figure 86: SV-GPS-2020 14 CFR § 91.227 Compliance Statement
To Next Page
Loading...
