System Overview
2-2 SkyView HDX System Installation Manual - Revision E
2.3 Instrument Panel Mounted Equipment
Examples of the Dynon-provided equipment (required and optional) typically mounted to
the instrument panel appear in the figures and table that follow. This information should
only be considered as an example of an installation, your airplane may differ.
2.3.1 SkyView HDX Displays
The SkyView system can support up to three HDX display units of any size. One display
must be located within the pilot’s primary field of view and be configured to always show
the Primary Flight Display (PFD). This display unit is referred to as the Primary Display.
The remaining displays may be mounted within the pilot’s Primary Maximum field of view
and configured to show any information desired. These display units are referred to as
Secondary Displays.
For more information on Primary and Primary Maximum field of view, refer to Sections
3.3.2 and 3.3.3.
2.3.2 Standby Display
The Standby Display is intended to provide the pilot immediate backup Primary Flight
Information in the event of a failure of the Primary Display.
2.3.3 Optional Avionics Trays
To simplify the equipment installation, Dynon has developed equipment mounting trays
that can attach to the HDX1100 and HDX800 displays and mount the various required
and optional equipment modules.
To Next Page
Loading...
