Dynon SkyView HDX - Example Checklist Formatting Notes

Appendix H: Checklists
SkyView HDX System Installation Manual - Revision E 30-5
CHKLST1.TITLE, BEFORE STARTING ENGINE
CHKLST1.LINE1,
CHKLST1.LINE2, BUILD YOUR CHECKLIST HERE
CHKLST2.TITLE, ENGINE START
CHKLST2.LINE1,
CHKLST2.LINE2, BUILD YOUR CHECKLIST HERE
CHKLST3.TITLE, PRE-TAXI & TAXI
CHKLST3.LINE1,
CHKLST3.LINE2, BUILD YOUR CHECKLIST HERE
CHKLST4.TITLE, RUN-UP & PRE-TAKEOFF
CHKLST4.LINE1,
CHKLST4.LINE2, BUILD YOUR CHECKLIST HERE
# …
CHKLST21.TITLE, MISC: TRANSPONDER CODES
CHKLST21.LINE1,
CHKLST21.LINE2, VFR - 1200 (USA)
CHKLST21.LINE3, VFR - 7000 (Europe)
CHKLST21.LINE4, Hijack – 7500
CHKLST21.LINE5, Radio Fail – 7600
CHKLST21.LINE6, Emergency - 7700
30.3 Example Checklist Formatting Notes:
Comment lines (not displayed as a Checklist item) begin with #. Example:
# This line in a checklist file will not be displayed in a checklist.
Checklist numbering starts with 0; the first Checklist displayed is CHKLST0.
For additional Checklists, increment the name CHKLIST in each section from 0. Example:
• CHKLST0
• CHKLST1
• CHKLST10
• CHKLIST11
• (etc.)
Each Checklist requires a title line in this format:
CHKLST(section number).TITLE, (title). Example:
CHKLST0.TITLE, PRE-FLIGHT
Each Checklist can have any number of Checklist items (including none), but each item
must be sequentially numbered, beginning from 1, in this format: