SV-XPNDR-261 Transponder Installation and Configuration
12-2 SkyView HDX System Installation Manual - Revision E
within SkyView system Software. See SV-XPNDR-261 Software Updates later in this
section for details on SV-XPNDR-261 Software updates.
The SV-XPNDR-261 operates at either 14-volt nominal or 28-volt nominal DC power
supply; no configuration changes are required.
12.1 Mechanical Installation
The SV-XPNDR-261 is designed to be mounted in any convenient location in the cockpit,
the cabin, or an avionics bay.
To Next Page
Loading...
