SkyView HDX Display Installation and Configuration
4-6 SkyView HDX System Installation Manual - Revision E
4.2 SkyView HDX Display Mechanical Installation
Consider the ease, or difficulty of disconnecting multiple connectors when removing a
SkyView display from the panel.
The following pages show the mechanical dimensions of the SkyView displays. Use the
dimensions (in inches) found in the appropriate diagram to plan for the space required by
the display.
To mount a SkyView display, cut an appropriately sized rectangular opening in your
panel, drill out the mounting holes, and use the included mounting screws to fasten the
display to the panel. See Figure 27 and Figure 28 for guidance.
To Next Page
Loading...
